Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
3.1. Passport data of the car
3.2. Points of rise and towage of the car
3.3. Kontrolnoizmeritelny devices
3.4. Alarm and control lamps, sound signaling devices
3.4.1. Check of serviceability of control lamps
3.4.2. A sound signaling device of a reminder on not switched off lighting
3.4.3. A sound signaling device of a reminder on the included back fog lamps
3.4.4. Hours
3.5. Governing bodies
3.6. Door locks
3.7. Luggage carrier lock
3.8. Cover and stopper of the fuel tank
3.9. Front seats
3.10. Folding of back seats
3.11. Head restraints
3.12. The hatch in a roof
3.13. Seat belts
3.14. Plafond of illumination of salon and lamp of individual lighting
3.15. Illumination of a luggage carrier or luggage compartment
3.16. Running in of the new car
3.17. Launch of the engine
3.18. Use of the automatic transmission
3.19. Check of level of oil in the engine
3.20. Replacement of oil in the engine
3.21. Replacement of an oil filter
3.22. Check of level of cooling liquid
3.23. Check of level of oil in the mechanical transmission
3.24. Check of level of oil in a case of the automatic transmission
3.25. Check of level of liquid in a tank of the hydraulic booster of steering
3.26. Check of level of liquid in tanks of hydraulic actuators of brakes and couplings
3.27. Check of level of liquid in tanks of windscreen washer and a cleaner of headlights
3.28. Replacement of lamps
3.29. Wheels and tires
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


3-4-1-proverka-ispravnosti-kontrolnykh-lamp.html

3.4.1. Check of serviceability of control lamps

To put the car on the parking brake and to turn a key in the ignition lock in the provision of "ON", without starting the engine. After that the following lamps have to light up:
Will light up, but in several seconds lamps have to go out:
If some lamp does not light up, then either its burn-out, or break of an electric chain is possible. In this case it is necessary to eliminate malfunction.


"previous page
3.4. Alarm and control lamps, sound signaling devices
following page"
3.4.2. A sound signaling device of a reminder on not switched off lighting