Wheels and tires. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
3.1. Passport data of the car
3.2. Points of rise and towage of the car
3.3. Kontrolnoizmeritelny devices
3.4. Alarm and control lamps, sound signaling devices
3.5. Governing bodies
3.6. Door locks
3.7. Luggage carrier lock
3.8. Cover and stopper of the fuel tank
3.9. Front seats
3.10. Folding of back seats
3.11. Head restraints
3.12. The hatch in a roof
3.13. Seat belts
3.14. Plafond of illumination of salon and lamp of individual lighting
3.15. Illumination of a luggage carrier or luggage compartment
3.16. Running in of the new car
3.17. Launch of the engine
3.18. Use of the automatic transmission
3.19. Check of level of oil in the engine
3.20. Replacement of oil in the engine
3.21. Replacement of an oil filter
3.22. Check of level of cooling liquid
3.23. Check of level of oil in the mechanical transmission
3.24. Check of level of oil in a case of the automatic transmission
3.25. Check of level of liquid in a tank of the hydraulic booster of steering
3.26. Check of level of liquid in tanks of hydraulic actuators of brakes and couplings
3.27. Check of level of liquid in tanks of windscreen washer and a cleaner of headlights
3.28. Replacement of lamps
3.29. Wheels and tires
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









3-29-kolesa-i-shiny.html

3.29. Wheels and tires


Fig. 1.71. A plate arrangement with the recommended pressure in tires


Check pressure in tires at least once a month, and also before a long trip. You carry out an inspection on cold tires. Pressure size in tires is specified on the plate attached to an average rack of a body from the driver (fig. 1.71).
Tires are subject to replacement at emergence on a wear indicator protector.

Fig. 1.72. Scheme of shift of wheels


It is recommended to carry out through each 10 000 km shift of wheels according to the scheme in fig. 1.72. Dimensional characteristics of wheels and tires are provided in tab. 1.11. By the special order the car can be completed with wheels from aluminum alloy of 5.5J14 in size.

Table 1.11 Dimensional characteristics of wheels and tires
Landing diameter, inch
Rim size
Departure of a rim, mm
Size of tires
13
5J13
35
175/70R13 (82S)
14
5.5J14
40
175/65R14(82H) 185/65R14(86H)

"previous page
3.28.10. Replacement of lamps of illumination, illumination of a luggage carrier, under a cowl and an additional stoplight
following page"
4. Petrol engines