Check of effort of movement of a gear lath. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
8.1. General information
8.2. Steering repair
8.2.1. Removal and installation of a shaft of steering
8.2.2. Removal and installation of the steering mechanism
8.2.3. Check of a free wheeling of a steering wheel
8.2.4. Check of axial movement of the mechanism
8.2.5. Check of effort of turn of a steering wheel
8.2.6. Check of effort of movement of a gear lath
8.2.7. Adjustment of an emphasis of a lath
8.2.8. Removal and installation of the pump of the hydraulic booster
8.2.9. Dismantling and assembly of the pump of the hydraulic booster
8.2.10. Removal of air from system of the hydraulic booster
8.2.11. Adjustment of a tension of a belt of the drive of the hydraulic booster
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









8-2-6-proverka-usiliya-peremeshheniya-zubchatojj-rejjki.html

8.2.6. Check of effort of movement of a gear lath

Lift a forward part of the car and remove wheels. Disconnect tips of steering drafts from rotary fists. Disconnect the cardan hinge located between shaft of steering and the steering mechanism for what turn off a fastening bolt. Launch the engine, warm up working liquid in system of steering to 60 — 80 °C. Measure by means of the dynamometer attached to steering draft, effort of movement of a lath from its average situation. If the measured effort exceeds 284 N, it is necessary to replace the steering mechanism. Connect the cardan hinge and establish steering drafts into place. Execute other assembly operations as it should be, the return to dismantling.


"previous page
8.2.5. Check of effort of turn of a steering wheel
following page"
8.2.7. Adjustment of an emphasis of a lath







7f435ca2