11.2.8. Removal and installation of window regulators of forward and back doors

Fig. 9.25. Details of window regulators: And — a window regulator with the manual drive; B — the power window; In — a back door; — a forward door; 1 — the frame flew down; 2 — glass; 3 — the directing fillet; 4 — loops; 5 — the limiter of opening of a door; 6 — the power window; 7 — the window regulator handle; 8 — a window regulator with the manual drive; 9 — back motionless glass; 10 — a frame of motionless glass

Details of the mechanism of a window regulator of back and forward doors are given in fig. 9.25.

Fig. 9.26. Details of doors: And — a forward door; B — a back door; 1 — a bolt of fastening of the electric motor of a window regulator; 2 — bolts of fastening of the directing glass rack; 3 — bolts of fastening of the adjusting device of the drive of the lock of a door; 4 — a bolt of fastening of the internal handle of the drive of the lock; 5 — bolts of fastening of the back directing fillet; 6 — bolts of fastening of lowering glass to a holder; 7 — bolts of fastening of the side amplifier of a door

Remove a door upholstery (see above). Remove the sealing panel. On the car with an electrowindow regulator temporarily join the socket and establish glass so that bolts of 6 (fig. 9.26) of fastening of the lowered glass to a holder were visible Turn out these bolts and by means of an adhesive tape record glass in such situation. On a forward door remove a plate of the side amplifier. Turn out bolts of a mechanical window regulator and remove it. On cars with electrowindow regulators turn out bolts of fastening of the electric motor to the window regulator drive, previously having disconnected its electrosocket.

You make installation of a window regulator as it should be, the return to its removal.