Removal and installation of a trunk lid (a body like sedan). Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Repair of a body
11.2.1. Removal and installation of a cowl
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of forward and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of forward and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (a body like hatchback)
11.2.13. Removal and installation of a trunk lid (a body like sedan)
11.2.14. Removal and installation of the dashboard
11.3. System of heating and ventilation
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Schemes of electric equipment
 









11-2-13-snyatie-i-ustanovka-kryshki-bagazhnika-kuzov-tipa-sedan.html

11.2.13. Removal and installation of a trunk lid (a body like sedan)


Fig. 9.32. Trunk lid details: 1 — a trunk lid; 2 — a loop;
3 — the torsion; 4 — the trunk lid lock; 5 — the buffer; 6 — an arm of a lamp of illumination of registration plate; 7 — a trunk lid lock drive cable;
8 — the trunk lid lock drive handle; 9 — draft


Details of a trunk lid are given in fig. 9.32.

Fig. 9.33. Removal and adjustment of a trunk lid: And — fastening of a trunk lid; B — fastening of a clamp of the lock; In — adjustment of the lock and a cable of the drive of the lock; 1 — bolts of fastening and adjustment of a trunk lid; 2 — screws of fastening and adjustment of a clamp of the lock; 3 — screws of fastening and adjustment of the lock; 4 — the screw of adjustment of a cable of the drive of the lock


Turn out two bolts of the top fastening of loops to a trunk lid. Supporting a cover, turn out two bolts of the lower fastening of loops to a trunk lid. Remove a trunk lid. You make installation of a trunk lid as it should be, the return to removal. At the same time pay attention to uniformity of a gap between a trunk lid and back wings. If necessary make adjustment (fig. 9.33). Check and adjust the provision of a clamp of the lock of a trunk lid so that there was no gap in movement of a cable of the drive of the lock.


"previous page
11.2.12. Removal and installation of a door of a back (a body like hatchback)
following page"
11.2.14. Removal and installation of the dashboard







7f435ca2