Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Repair of a body
11.2.1. Removal and installation of a cowl
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of forward and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of forward and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (a body like hatchback)
11.2.13. Removal and installation of a trunk lid (a body like sedan)
11.2.14. Removal and installation of the dashboard
11.3. System of heating and ventilation
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


11-2-2-snyatie-i-ustanovka-perednego-bampera.html

11.2.2. Removal and installation of a front bumper


Fig. 9.5. Details of bumpers and front grille: And — a front bumper; B — a rear bumper of three - and five-door cars; In — a rear bumper of the four-door car


Fig. 9.6. Clamp of side fastening of a front bumper


Fig. 9.7. Lower bolts of fastening of a front bumper


Fig. 9.8. Top bolts of fastening of a front bumper


Details of a front bumper are shown in fig. 9.5. Open a cowl, remove hairpins of fastening of a front grille and remove it. Remove indexes of turn (see. "Electric equipment") also wring out side clamps of fastening of a bumper (fig. 9.6). Turn out the lower bolts of fastening of a bumper, then the top bolts (fig. 9.7 and 9.8).
Pull together with the assistant for a bumper forward and remove it, trying not to scratch forward wings.
Establish a bumper, working as it should be, the return to removal.


"previous page
11.2.1. Removal and installation of a cowl
following page"
11.2.3. Removal and installation of a rear bumper