Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Repair of a body
11.2.1. Removal and installation of a cowl
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of forward and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of forward and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (a body like hatchback)
11.2.13. Removal and installation of a trunk lid (a body like sedan)
11.2.14. Removal and installation of the dashboard
11.3. System of heating and ventilation
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


11-2-6-snyatie-i-ustanovka-obivki-perednikh-dverejj.html

11.2.6. Removal and installation of an upholstery of forward doors


Fig. 9.18. Details of an upholstery of forward doors: And — release models till April, 1996; B — release models since April, 1996; In — four - and five-door cars; — the three-door car; 1 — a door upholstery; 2 — a door upholstery pocket; 3 — an armrest; 4 — facing of the internal handle of the drive of the lock;
5 — the internal handle of a door; 6 — the panel of switches of electrowindow regulators


Details of an upholstery of forward doors are given in fig. 9.18.

Fig. 9.19. Removal of facing of the internal handle of the drive of the lock of a door

(
Fig. 9.20. Removal of the control panel of electrowindow regulators


Fig. 9.21. Places of fastening of an upholstery of a forward door (top part


Disconnect a wire from the minus plug of the rechargeable battery. By means of the screw-driver or other tool with a flat edge remove facing from the internal handle of the drive of the lock of a door of fig. 9.19). On models with a mechanical window regulator remove the window regulator handle. On models with the electroelevator remove the switch of control of the electroelevator on an armrest (fig. 9.20) and disconnect the wires suitable it. On release models till April, 1996 remove an armrest and turn off three bolts which are under it. On release models after April, 1996 remove the internal handle of a door, having turned out a bolt of its fastening. Turn out bolts of fastening of an upholstery of a door (fig. 9.21, 9.22). By means of the flat tool separate an upholstery from a door.

Fig. 9.22. Places of fastening of an upholstery of a forward door (lower part)


You make installation of an upholstery as it should be, the return to removal.

"previous page
11.2.5. Removal and installation of forward and back doors
following page"
11.2.7. Removal and installation of an upholstery of back doors