Removal and installation of forward and back doors. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
11.1. Main data
11.2. Repair of a body
11.2.1. Removal and installation of a cowl
11.2.2. Removal and installation of a front bumper
11.2.3. Removal and installation of a rear bumper
11.2.4. Removal and installation of a forward wing
11.2.5. Removal and installation of forward and back doors
11.2.6. Removal and installation of an upholstery of forward doors
11.2.7. Removal and installation of an upholstery of back doors
11.2.8. Removal and installation of window regulators of forward and back doors
11.2.9. Removal and installation of the external handle of a door
11.2.10. Removal and installation of locks of doors
11.2.11. Removal and installation of glasses
11.2.12. Removal and installation of a door of a back (a body like hatchback)
11.2.13. Removal and installation of a trunk lid (a body like sedan)
11.2.14. Removal and installation of the dashboard
11.3. System of heating and ventilation
11.4. Climatic installation (conditioner)
11.5. System of safety cushions and prednatyazhitel of seat belts
12. Appendices
13. Schemes of electric equipment
 









11-2-5-snyatie-i-ustanovka-perednikh-i-zadnikh-dverejj.html

11.2.5. Removal and installation of forward and back doors


Fig. 9.14. Details of doors: And — a forward door; B — a back door; 1 — the door panel; 2 — a door upholstery; 3 — the sealing panel; 4 — a doorway sealant; 5 — loops; 6 — the limiter of opening of a door; 7 — a molding; 8 — a guide of the lowered glass




Fig. 9.15. Removal of a door: 1 — the limiter of opening of a door. Shooters showed bolts of fastening of loops of a door


Fig. 9.16. Bolts of fastening of a door to a rack of a body and adjustment of a loop of a door


Details of doors are shown in fig. 9.14. It is necessary to carry out this to work with the assistant. Remove the minus plug from the rechargeable battery. Order of removal of forward and back doors identical. Remove a door upholstery (see below), disconnect shtekerny blocks, having marked their arrangement. By means of a drift beat out an axis of the limiter 1 (fig. 9.15). Turn out bolts of fastening of a door to loops (fig. 9.16), at the same time the assistant has to support a door, and glass has to be lowered. Remove a door.

Fig. 9.17. Adjustment of a clamp of the lock of a door: 1 — screws of fastening of a clamp


You make installation of a door as it should be, the return to removal. Adjust operation of the lock, changing the provision of a clamp of a door (fig. 9.17).

"previous page
11.2.4. Removal and installation of a forward wing
following page"
11.2.6. Removal and installation of an upholstery of forward doors







7f435ca2