11.2.12. Removal and installation of a door of a back (a body like hatchback)
Fig. 9.30. Back door details: 1 — a back door; 2 — loops; 3 — a gas-filled emphasis; 4 — a back doorway sealant; 5 — the buffer; 6 — an arm of a lamp of illumination of registration plate; 7 — glass; 8 — a glass sealant; 9 — the lock;
10 — draft of the drive of the lock; 11 — the lock drive handle
Details of a door of a back are shown in fig. 9.30
Disconnect a wire from the minus plug of the rechargeable battery. Remove a back door upholstery.
Fig. 9.31. Removal and adjustment of a door of a back:
And — fastening of a door of a back; B — fastening of a clamp of the lock; In — adjustment of the lock; 1 — bolts of fastening of a door of a back; 2 — bolts of fastening of a gas-filled emphasis of a door of a back; 3 — bolts of fastening and adjustment of a clamp of the lock; 4 — bolts of fastening and adjustment of the lock
Disconnect from glass of a wire of a heater and disconnect its shtekerny socket. Disconnect and remove electric wires of a heater of back glass. Holding a door, turn out bolts of fastening of a gas-filled emphasis (fig. 9.31)
. Turn out bolts of fastening of loops to a door of a back and remove a back door.
You make installation of a door of a back as it should be, the return to removal. At the same time pay attention to uniformity of a gap between a door and back wings. If necessary make adjustment of provision of a clamp and the lock of a door.