Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
4.1. Removal and installation of the power unit
4.2. Dismantling and assembly of the engine
4.3. Block of cylinders
4.4. Conrod and piston group
4.5. Bent shaft and flywheel
4.6. Gas distribution mechanism
4.7. Head of the block of cylinders of GA14DE and GA16DE engines
4.8. Head of the block of cylinders of the SR20DE engine
4.9. Cooling system
4.10. Lubrication system
4.11. System of production of the fulfilled gases
4.12. Power supply system
4.13. Complex Control System of the Engine (CCSE)
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


4-11-sistema-vypuska-otrabotavshikh-gazov.html

4.11. System of production of the fulfilled gases


Fig. 2.84. Details of system of production of the fulfilled gases: 1 — a final collector; 2 — laying of a collector; 3 — the sensor of content of oxygen in the fulfilled gases; 4 — the pipeline of the recirculation of the fulfilled gases (RFG); 5 — the first catalytic converter; 6 — the thermoinsulating screen; 7 — a reception pipe of the muffler; 8 — the second catalytic converter; 9 — the forward muffler; 10 — the back muffler


On cars the system of production of the fulfilled gases consists of a reception pipe 7 (fig. 2.84), two catalytic converters, forward and back mufflers. The system of release is fixed on the car on rubber suspension brackets. It is possible to remove each section separately or all system in general.

"previous page
4.10.4. Removal and installation of the oil pallet of the SR20DE engine
following page"
4.12. Power supply system