Removal and installation of the stabilizer of cross stability. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
7.1. Forward suspension bracket
7.1.1. Removal and installation of a rack of a forward suspension bracket
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
7.1.3. Removal and installation of the stabilizer of cross stability
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket
7.1.5. Check and adjustment of angles of installation of forward wheels
7.1.6. Replacement of the hug bearing of a forward wheel
7.2. Back suspension bracket
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









7-1-3-snyatie-i-ustanovka-stabilizatora-poperechnojj-ustojjchivosti.html

7.1.3. Removal and installation of the stabilizer of cross stability

Lift and establish a forward part of the car on supports. Remove wheels. Turn out bolts of fastening of collars of pillows of the stabilizer to a suspension bracket cross-piece. Turn off nuts of fastening of racks of the stabilizer to suspension bracket levers. Carefully take out the stabilizer together with its racks through a wheel arch.
Installation is carried out as it should be, the return to removal, taking into account the following.
Replace new rubber pillows of the stabilizer.
Tags on a bar of the stabilizer have to be turned to a back part of the car.

"previous page
7.1.2. Dismantling and assembly of a rack of a forward suspension bracket
following page"
7.1.4. Removal and installation of a cross-piece of a forward suspension bracket







7f435ca2 Постельное белье Иваново от производителя официальный сайт смотрите здесь.
Скрадок для охоты на вяхиря купить источник.