7.1.1. Removal and installation of a rack of a forward suspension bracket

Fig. 5.4. Fastening of a rack of a forward suspension bracket to a body: 1 — a shock-absorber rod nut; 2 — a nut of fastening are resistant to a body

Lift a forward part of the car, establish on supports, remove a wheel. Turn off nuts of fastening of the top support of a rack to a body (fig. 5.4). Disconnect a collar of fastening of a brake hose to a suspension bracket rack. Turn out two bolts of the lower fastening of a rack to a rotary fist and take out their (fig. 5.5). By means of mount separate a rack from a rotary fist. Carefully take out a rack assembled through a wheel arch.

Fig. 5.5. Bolts of fastening are resistant to a rotary fist

Fig. 5.6. An arrangement of a tag which has to be directed towards a wheel

You carry out installation of a rack as it should be, the return to removal. Track that the tag on the top support of the shock-absorber was directed towards a wheel of the car (fig. 5.6). You make a final inhaling of threaded connections after lowering of wheels on the earth.