6.3.4. Adjustment of the selector of the transmission

Fig. 4.48. Adjustment of a cable of the selector: 1 — a selector cable; 2 — the selector lever (on the transmission); 3 — a nut of fastening of a cable of the selector

Fig. 4.49. Adjustment of the selector of the transmission: 1 — the multiposition switch; 2 — the selector lever; 3 — test openings; shooters showed nuts of fastening of the multiposition switch

Turn off a nut of fastening of a cable of the drive of the selector to the lever of the selector (fig. 4.48). Install the selector lever in situation "N". Turn off nuts of fastening of the multiposition switch (fig. 4.49). Move the multiposition switch so that the core with a diameter of 4 mm could enter test openings of the lever and switch at the same time. Tighten in this provision of a nut of fastening of the multiposition switch and take out a core from openings. Establish into place and adjust a selector drive cable.