Removal and installation of the generator. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Rechargeable battery
10.2. Generator
10.2.1. Removal and installation of the generator
10.2.2. Adjustment of a tension of a belt of the drive of the generator
10.2.3. Dismantling and assembly of the generator
10.3. Starter
10.4. Removal and installation of a combination of devices
10.5. Devices of lighting and light alarm system
10.6. Cleaners of glasses
10.7. Onboard electric network
11. Body
12. Appendices
13. Schemes of electric equipment
 









10-2-1-snyatie-i-ustanovka-generatora.html

10.2.1. Removal and installation of the generator

Disconnect wires from the rechargeable battery. Remove the heat-shielding screen of a final collector. Disconnect all wires from the generator and take them aside. On the diesel engine disconnect hoses from the vacuum pump. Merge a part of cooling liquid then disconnect the bringing hose from a radiator.

Fig. 8.1. Removal of a belt of the drive of the generator (GA14DE engine): 1 — a bolt of adjustment of a tension of a belt; 2 — a lock bolt; 3 — a generator pulley; 4 — a conditioner compressor pulley; 5 — a pulley of the pump of the hydraulic booster of steering; 6 — a pulley of the water pump; 7 — a tension roller of a belt of the drive of the conditioner


Fig. 8.2. Removal of a belt of the drive of the generator on the diesel engine: 1 — a bolt of adjustment of a tension of a belt; 2 — a lock bolt


Disconnect a plait of wires in a zone of fastening of the generator and, without disconnecting shtekerny sockets, take him aside. On cars with climatic installation carefully take aside pipelines, without disconnecting them. Weaken a generator belt tension for what release a lock bolt, then release a bolt of adjustment of a tension of a belt (fig. 8.1 and 8.2). Take off a belt from a generator pulley. Turn out a lock bolt of the generator, and then the lower bolt of fastening. On diesel engines disconnect the vacuum pump from the generator.
You make installation as it should be, the return to removal. Adjust a belt tension. Add cooling liquid and remove air traffic jams.

"previous page
10.2. Generator
following page"
10.2.2. Adjustment of a tension of a belt of the drive of the generator







7f435ca2