Removal and installation of a combination of devices. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
10.1. Rechargeable battery
10.2. Generator
10.3. Starter
10.4. Removal and installation of a combination of devices
10.5. Devices of lighting and light alarm system
10.6. Cleaners of glasses
10.7. Onboard electric network
11. Body
12. Appendices
13. Schemes of electric equipment
 









10-4-snyatie-i-ustanovka-kombinacii-priborov.html

10.4. Removal and installation of a combination of devices


Fig. 8.6. Screws of fastening of a frame of a combination of devices


Fig. 8.7. Screws of fastening of a combination of devices


Disconnect from the rechargeable battery minus a wire. Establish a steering wheel in situation for the rectilinear movement. Remove a facing casing of a shaft of steering. Remove a steering wheel. Turn out screws of fastening of a frame of a combination of devices (fig. 8.6), then turn out screws of fastening of a combination of devices (fig. 8.7), pull it on yourself and disconnect a cable of a speedometer and sockets of devices. Take out a combination of devices.

Fig. 8.8. Details of a combination of devices: 1 — protective glass; 2 — a cover; 3 — the index of temperature of cooling liquid; 4 — a tachometer; 5 — a speedometer; 6 — the index of level of fuel; 7 — the case; 8 — the printed circuit board


You make installation as it should be, the return to removal. Before a final inhaling of screws of fastening be convinced of the correct connection of sockets and a cable of a speedometer. In fig. 8.8 details of a combination of devices are shown.

"previous page
10.3.2. Dismantling and assembly of a starter
following page"
10.5. Devices of lighting and light alarm system