Removal and installation of the brake mechanism. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. General information
9.2. Brake mechanisms of forward wheels
9.2.1. Replacement of brake shoes
9.2.2. Removal and installation of the brake mechanism
9.2.3. Replacement of a brake disk
9.3. Brake mechanisms of back wheels of drum type
9.4. Brake mechanisms of back wheels of disk type
9.5. Drive of brakes
9.6. Anti-blocking system of brakes
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









9-2-2-snyatie-i-ustanovka-tormoznogo-mekhanizma.html

9.2.2. Removal and installation of the brake mechanism


Fig. 7.7. (2) fastenings of a guide of brake shoes directing fingers (1) of brake shoes and bolts to a rotary fist


Lift a forward part of the car and put it on supports. Remove forward wheels, having noted their situation concerning naves. Pump out the syringe a part of brake fluid from a tank. By means of the screw-driver slightly drown the piston in the support cylinder. Turn out bolts of fastening of a guide of brake shoes to a rotary fist (fig. 7.7). Turn out the union of a brake hose from a support, trying not to allow liquid leak. Remove a support, a guide of blocks and brake shoes assembled. Take out brake shoes. Check technical condition and clear all details.
You make installation as it should be, the return to removal. After installation remove air from system of brakes.

"previous page
9.2.1. Replacement of brake shoes
following page"
9.2.3. Replacement of a brake disk