Removal and installation of shaft of the drive of forward wheels. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
6.1. Coupling
6.2. Mechanical transmission
6.3. Automatic transmission
6.4. Drive of forward wheels
6.4.1. General information
6.4.2. Removal and installation of shaft of the drive of forward wheels
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









6-4-2-snyatie-i-ustanovka-valov-privoda-perednikh-koles.html

6.4.2. Removal and installation of shaft of the drive of forward wheels


Fig. 4.56. Details of the drive of a forward wheel: I \petrol engine; II \diesel engine; 1 — the external hinge of equal angular speeds; 2 — a collar of fastening of a protective cover; 3 — a protective cover; 4, 9 — lock rings; 5 — a shaft; 6 — anti-vibration freight; 7 — a collar of anti-vibration freight; 8 — the "tripod" hinge;
10 — the case of the internal hinge of equal angular speeds; And — distance between an external edge of freight and the external surface of the external hinge


When working be guided by fig. 4.56. Merge oil from the transmission. Lift a forward part of the car and remove a wheel from the necessary party. On the car with the automatic transmission for removal of the right shaft at first remove the left shaft of the drive.

Fig. 4.57. Removal of the internal hinge of equal angular speeds


Disconnect a collar of fastening of a brake hose from a rack of a forward suspension bracket. Turn off two bolts of fastening of a guide of brake shoes, remove a guide and attach it a wire to an arch of a forward wheel, without loading a brake hose. Block from rotation by means of adaptation a wheel nave, take out the forelock, turn off and remove a nut of fastening of a nave. Turn off a nut of fastening of a finger of the spherical hinge of steering draft and by means of a universal stripper to a vypressuyta a finger from a rotary fist. Turn off two bolts of fastening of a rotary fist to a rack of a forward suspension bracket and disconnect a fist from a rack. Turn a rotary fist down and take the external hinge of a shaft of the drive from a nave. From the case of the transmission use any lever as the hinge fastens in semi-axial gear wheels by means of a lock spring ring therefore it is required to make considerable effort for its removal (fig. 4.57) to extraction of the internal hinge.

Fig. 4.58. Vypressovka of the drive of a forward right wheel from a case of the automatic transmission: 1 — a screw-driver edge; 2 — an axis of satellites; 3 — a shlitsevy shaft of the drive of a forward wheel; 4 — a semi-axial gear wheel; 5 — the screw-driver


For removal of a shaft of the drive of a forward wheel on the right side on cars with the automatic transmission insert, as shown in fig. 4.58, the screw-driver and a vypressuyta the hinge of equal angular speeds through an exhaust outlet of differential for the left shaft. Take out a drive shaft, monitoring existence of a lock ring on vents of the internal hinge.
At installation of a power shaft replace everything самоконтрящиеся nuts. Establish a new epiploon in a transmission case, having filled its working part with lubricant. Replace a lock ring on a shaft of the internal hinge. Carefully enter a shaft into an opening of a semi-axial gear wheel to feeling of a zashchelkivaniye of a lock ring. Check latching of a shaft twitching it in the axial direction. Establish a tail part of the external hinge in a wheel nave opening. Carry out other operations as it should be, the return to removal. Tighten the set moment a nut of a nave of a forward wheel. Fill in oil in the transmission.

"previous page
6.4.1. General information
following page"
7. Running gear







7f435ca2