|
6-4-1-obshhie-svedeniya.html
6.4.1. General information
|
|
Fig. 4.54. Hinge of equal angular speeds external ZF80 or ZA90
|
|
|
Fig. 4.55. Hinge of equal angular speeds internal TS70C or TS79C
|
|
|
Fig. 4.56. Details of the drive of a forward wheel: I \petrol engine; II \diesel engine; 1 — the external hinge of equal angular speeds; 2 — a collar of fastening of a protective cover; 3 — a protective cover; 4, 9 — lock rings; 5 — a shaft; 6 — anti-vibration freight; 7 — a collar of anti-vibration freight; 8 — the "tripod" hinge;
10 — the case of the internal hinge of equal angular speeds; And — distance between an external edge of freight and the external surface of the external hinge
|
The drive of forward wheels is carried out by two shaft of different length having the hinges of equal angular speeds (HEAS) on the ends. From a wheel the hinge (external) ball type (fig. 4.54) is installed. From the transmission "tripod" hinges (fig. 4.55) are used. For an equilibration of vibration forces on the right shaft freight is established. The same freight is established also on left to a car shaft with the GA16DE engine. Details of the drive of wheels are given in fig. 4.56. The characteristic of hinges is presented in tab. 4.4.
Table 4.4 of the Characteristic of hinges of equal angular speeds
|
Parameter
|
Value of parameter of the external / internal hinge at installation on cars with engines
|
|
GA14DE
|
GA16DE, SR20DE
|
CD20
|
|
Hinge type
|
ZF80T/TC70C
|
ZF90/TS79C
|
|
Length of a protective cover, mm
|
90,5-92,5/95,5-97,5
|
96-98/101,5-103,5
|
|
Amount of the lubricant filled in a cover,
|
95/110-120
|
115-125/
|
55-165
|
Distance And, mm (fig. 4.56)
|
432-442
|
432-442 (right shaft) 175,3-185,3 (left shaft)
|
372,5-377,5/37
|
|
Length of anti-vibration freight, mm
|
66
|
66 (right shaft) 58 (left shaft)
|
37
|
|
|
