Removal and installation of the brake mechanism. Nissan Almera (from 1995 to 1999 release)
Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
9.1. General information
9.2. Brake mechanisms of forward wheels
9.3. Brake mechanisms of back wheels of drum type
9.4. Brake mechanisms of back wheels of disk type
9.4.1. Replacement of brake shoes
9.4.2. Removal and installation of the brake mechanism
9.4.3. Replacement of a brake disk
9.5. Drive of brakes
9.6. Anti-blocking system of brakes
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 









9-4-2-snyatie-i-ustanovka-tormoznogo-mekhanizma.html

9.4.2. Removal and installation of the brake mechanism


Fig. 7.12. Bolts (1) of fastening of the directing fingers and bolts (2) fastenings of a guide of brake shoes to a wheel nave axis


Lift a back part of the car and remove wheels, having noted their situation concerning naves. Pump out by means of the syringe brake fluid from a tank. Disconnect the union of a brake hose from a support, having taken measures to avoid the passage of brake fluid. Muffle openings to prevent hit of dirt in the brake system. Disconnect a cable of the drive of the parking brake. By means of the screw-driver slightly move the piston in the brake cylinder. Turn off two bolts of fastening of a guide (fig. 7.12). Remove knot of a support and a guide with brake shoes assembled. Take out brake shoes. Check and clear all details.
You make installation as it should be, the return to removal. Remove air from system of a hydraulic actuator of brakes and adjust the parking brake system.

"previous page
9.4.1. Replacement of brake shoes
following page"
9.4.3. Replacement of a brake disk