Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
3.1. Passport data of the car
3.2. Points of rise and towage of the car
3.3. Kontrolnoizmeritelny devices
3.4. Alarm and control lamps, sound signaling devices
3.5. Governing bodies
3.6. Door locks
3.7. Luggage carrier lock
3.8. Cover and stopper of the fuel tank
3.9. Front seats
3.10. Folding of back seats
3.11. Head restraints
3.12. The hatch in a roof
3.13. Seat belts
3.14. Plafond of illumination of salon and lamp of individual lighting
3.15. Illumination of a luggage carrier or luggage compartment
3.16. Running in of the new car
3.17. Launch of the engine
3.18. Use of the automatic transmission
3.19. Check of level of oil in the engine
3.20. Replacement of oil in the engine
3.21. Replacement of an oil filter
3.22. Check of level of cooling liquid
3.23. Check of level of oil in the mechanical transmission
3.24. Check of level of oil in a case of the automatic transmission
3.25. Check of level of liquid in a tank of the hydraulic booster of steering
3.26. Check of level of liquid in tanks of hydraulic actuators of brakes and couplings
3.27. Check of level of liquid in tanks of windscreen washer and a cleaner of headlights
3.28. Replacement of lamps
3.29. Wheels and tires
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


3-12-lyuk-v-kryshe.html

3.12. The hatch in a roof


Fig. 1.36. The hatch in a cover: And — control of switches; B — removal of a cover and closing of the hatch manually; 1 — closing of the hatch; 2 — opening of the hatch; 3 — lowering; 4 — rise


The drive of the hatch operates only at position of the ON ignition key. The hatch can move in the longitudinal direction of the car or rise the back part. For moving of the hatch move a rychazhok of the switch (fig. 1.36, A) back, for closing — forward. For raising of a back part of the hatch it is necessary to press at the closed hatch a back part of a key, for lowering — to press a forward part of a key. At failure of the electric drive the hatch can be closed manually. For this purpose it is necessary to uncover (see fig. 1.36, B), to remove a crossing point and by means of a key from a set of the tool to turn a hatch electric motor shaft before its full closing.


"previous page
3.11. Head restraints
following page"
3.13. Seat belts