Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
8.1. General information
8.2. Steering repair
8.2.1. Removal and installation of a shaft of steering
8.2.2. Removal and installation of the steering mechanism
8.2.3. Check of a free wheeling of a steering wheel
8.2.4. Check of axial movement of the mechanism
8.2.5. Check of effort of turn of a steering wheel
8.2.6. Check of effort of movement of a gear lath
8.2.7. Adjustment of an emphasis of a lath
8.2.8. Removal and installation of the pump of the hydraulic booster
8.2.9. Dismantling and assembly of the pump of the hydraulic booster
8.2.10. Removal of air from system of the hydraulic booster
8.2.11. Adjustment of a tension of a belt of the drive of the hydraulic booster
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 





7f435ca2 https://lehome.ru/katalog/pufiki/?f_product_color_gray=on


8-2-10-udalenie-vozdukha-iz-sistemy-gidrousilitelya.html

8.2.10. Removal of air from system of the hydraulic booster

Check an inhaling of unions of a hydraulic system. At the idle engine add working liquid in a tank of the pump of the hydraulic booster to a tag "MOVE" (in a cold state). Lift a forward part of the car and quickly turn a steering wheel here and there (but not against the stop) until liquid level in a tank does not cease to change. Launch the engine and repeat this operation some time with a frequency of rotation of the engine idling. Bring liquid level to norm.

"previous page
8.2.9. Dismantling and assembly of the pump of the hydraulic booster
following page"
8.2.11. Adjustment of a tension of a belt of the drive of the hydraulic booster