Service of Nissan Almera from 1995 to 2000 in N15 body
1. General information
2. General requirements to car repairs
3. Operation and maintenance of the car
4. Petrol engines
4.1. Removal and installation of the power unit
4.2. Dismantling and assembly of the engine
4.3. Block of cylinders
4.4. Conrod and piston group
4.5. Bent shaft and flywheel
4.6. Gas distribution mechanism
4.7. Head of the block of cylinders of GA14DE and GA16DE engines
4.8. Head of the block of cylinders of the SR20DE engine
4.9. Cooling system
4.9.1. Removal, installation and adjustment of a tension of a belt of the drive of the water pump
4.9.2. Removal and installation of the water pump
4.9.3. Washing and filling of the cooling system
4.10. Lubrication system
4.11. System of production of the fulfilled gases
4.12. Power supply system
4.13. Complex Control System of the Engine (CCSE)
5. Diesel engines
6. Transmission
7. Running gear
8. Steering
9. Brake system
10. Electric equipment
11. Body
12. Appendices
13. Schemes of electric equipment
 





7f435ca2


4-9-2-snyatie-i-ustanovka-vodyanogo-nasosa.html

4.9.2. Removal and installation of the water pump

Take off a belt of the drive of the water pump. Merge cooling liquid. Turn out bolts of fastening of a pulley of the water pump and remove a pulley. Turn out bolts of fastening of the case of the thermostat to the water pump. Turn out bolts of fastening of the pump and remove it. In the presence of a side play of bearings, wear tracks, deformation of working surfaces of the pump replace it.
Before installation clear a pump installation site of the remains of laying and sealant. Apply sealant on the cleared places and install the pump.
Execute other operations as it should be, the return to removal. Launch the engine and be convinced of lack of a leak.


"previous page
4.9.1. Removal, installation and adjustment of a tension of a belt of the drive of the water pump
following page"
4.9.3. Washing and filling of the cooling system